东部双倾斜太阳能镇流器安装系统平面屋顶
kseng`sEast West dual tilt mounting system is a exclusive design, it can install more solar panel in the same area, and higher energy production output.Greater overall system power production under the same roof area.
. Cost Effectiveness, the same module qualities ( modules are quite cheap), East West dual tilt mounted on the flat rooftop can save on cost of energy. As solar system in an East-West solar racking are more packed together, potentially you would be saving some rails on the system. When you are installing a large project, bits and pieces adds up.
. Easier on the roof and Prevent winds blowing over
面向朝北的面板标题为30°,需要重型混凝土镇流器或更强大的安装,以防止风吹过上的模块或覆盖屋顶。使用东部系统时较少的空气阻力允许将其安装在更少的结构上坚固的屋顶上,并在将来的其他项目中保留屋顶装载能力。
材料: | Aluminum 6005-T5 & SUS 304 Stainless Steel |
Application: | Flat Rooftop |
Standard: | AS / NZS 1170 |
Wind Load: | 60M/S |
Snow Load: | 1.4KN/M2 |
认证: | ISO9001/CE/UL |
Warranty: | 10 Years |
Service Life: | 25 Years |
适用模块: | 框架或无框架 |
卡塞:
To avoid deadlock of stainless steel fastener, please avoid using electric tools for final tightening. And refer to the safe torque refined for stainless steel in the following forms. And: Do not fasten bolts tightly until each component is adjusted properly.
Bolt Dimension |
Safe Torque(N*M) | Bolt Dimension | Safe Torque(N*M) |
M1 |
0.0193 | M2.5 | 0.356 |
M1.1 | 0.0272 | M3 | 0.634 |
M1.2 | 0.0369 | M3.5 | 0.997 |
M1.4 | 0.0578 | M4 | 1.48 |
M1.6 | 0.0853 | M4.5 | 2.14 |
M1.8 | 0.129 | M5 | 2.98 |
M2 | 0.174 | M6 | 5.07 |
M2.2 | 0.229 | M7 | 8.5 |
M8 | 12.3 | M10 | 24.4 |
M12 | 42.5 | M14 | 67.6 |
成分:
安装步骤:
According to the panel array drawing, Locate the Pillars. Connect Pillars with M10*20 bolt and Guide Slider.
用角度和螺栓M8 * 25构造三角形。
Put Ballast Plate on Pillar 22, and fix triangle structure to the Pillar 22 with bolt M10*20.
Put on end clamp and mid clamp, not tightened.
Ballast with Concrete Block.
7.8。安装panel, tighten bolt of clamps.
优点: